Klicky-Probe

Microswitch probe with magnetic attachement, primarily aimed at CoreXY 3d printers

View project on GitHub

Klicky Probe Bracket for MGN12 X Carriage

BOM

  • 2x M3x5x4mm heatset insert
  • 2x M3x16 or M3x20 (or whatever works for you depending on the AB/SB mount you’re using)
  • Default Voron settings
  • Print as-is

Install

It is recommended to install the probe bracket with the heatset insert face inwards to provide more leverage and support to the probe bracket.