STL files for Klicky probe on a Zero G Mercury One with Voron Toolhead

Here you can find the parts that are specific to the Zero G Mercury One when using a Voron Toolhead (Afterburner / Stealthburner).

There is no need for supports, all the files are ready to print, they are in the recommended orientation.

The Klicky Probe consists on four different components:

• Toolhead mount, found on the AB/SB STL directory KlickyProbe_AB_mount_v2
• the probe itself, found on the KlickyProbe STL directory KlickyProbe_v2
• probe dock, found on the base STL directory Probe_Dock_v2
• Frame dock mount, found in this directory.

The recommended printing configuration are:

• initial layer height: 0.24
• layer height: 0.2mm
• bottom/top/perimeters: 4
• infill: more than 23%
• infill type: Cubic
• Thin walls: On