STL files for Klicky probe regular probe

There is no need for supports, all the files are ready to print, they are in the recommended orientation, the standard probe (KlickyProbe_v2.stl) can also be printed with the magnet hole facing down without supports. You can also use brim on the probes to help with bed adhesion.

• Version 0.1 - initial release
• Version 0.2 - Revised probe and dock to improve the docking fit, remaining components are compatible
  • Thanks to oc_geek for improving the probing of a badly tilted gantry (10º) and the probe and dock attachment, it’s much better now
• Version 2
  • Reduced the dock by 2mm, extended the dock mounts by 2mm
  • Added two new probes, one mostly for Voron v0 the oher for Tiny-M, they extend the original by different lengths below the nozzle

The Klicky Probe consists on four different components:

• Toolhead mount, found on the printer specific STL directory
• the probe itself
• probe dock
• Frame dock mount, found on the printer specific STL directory

The recommended printing configuration are:

• initial layer height:0.24mm
• layer height: 0.2mm
• bottom/top/perimeters: 4
• infill: more than 23%
• infill type: Cubic
• Thin walls: On